360 jas connector board-to-board connectors 0.4mm (.016") pitch emboss tape features ?the plug housing is constructed of two separate parts. this allows the connector to be put under greater torsion strain than similar connectors without any damage being done to the solder joints. ?both plug and receptacle have the double i type solder tabs, which reduces the stress by the distorted mating/unmating applied to the solder tails. specifications ?current rating: 0.3a ac,dc ?voltage rating: 30v ac,dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/70m ? max. after environmental testing/140m ? max. ?insulation resistance: 50m ? min. ?withstanding voltage: 100v ac/minute * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
361 0.4(.016) 1.7( .067 ) b a 4.2(.165) 0.5 (.020) 2.6( .102 ) b q'ty / reel 19.0( .748) 23.0( .906) 27.0(1.063) 2,500 2,500 1,500 circuits dimensions mm(in.) 80 100 120 a 15.6(.614) 19.6(.772) 23.6(.929) model no. 80p-jasks-gd-tf 100p-jasks-gd-tf 120P-JASKS-GD-TF material and finish contact: phosphor bronze, nickel-undercoated, selective gold-plated housing: pps, ul94v-0 solder tab: brass, copper-undercoated, tin/lead-plated 0.4(.016) 1.5 (.059) a b 0.16(.006) 4.0(.157) ( )r-jasks-gd-tf:3.2(.126) ( )r4.5-jasks-gd-tf:3.7(.146) 0.5 ( .020 ) b q'ty / reel 18.6( .732) 22.6( .890) 26.6(1.047) 2,500 2,500 1,500 circuits dimensions mm(in.) 80 100 120 a 15.6(.614) 19.6(.772) 23.6(.929) model no. stacking height 80r-jasks-gd-tf 100r-jasks-gd-tf 100r4.5-jasks-gd-tf 120r4.5-jasks-gd-tf material and finish contact: phosphor bronze, nickel-undercoated, selective gold-plated housing: lcp, ul94v-0 solder tab: brass, copper-undercoated, tin/lead-plated 4.0mm(.157) 4.5mm(.177) note: the products listed above are supplied on embossed-tape. note: the products listed above are supplied on embossed-tape. plug receptacle jas connector
362 feeding direction [13(.512)dia.] + 2.5 -1.0 + .098 -.039 w1 feeding direction carier tape cover tape f 0.1(.004) s 0.1(.004) w 0.3(.012) ( ) 1.75 0.1 (.069 .004) 1.55 0.05 (.061 .002)dia. 2.0 0.1 (.079 .004) 4.0 0.1 (.157 .004) 2.0 0.5 (.079 .002) 380 2.0 (14.961 .079) dia. feeding direction cover tape leader carrier tape the end part 160(6.299)min. connector mounting part 400(15.748)min. leader part 100(3.937)min. 0.5(.020) 0.5(.020) 4.2(.165) 4.0(.157) ( )r-jasks-gd-tf:4.0(.157) ( )r4.5-jasks-gd-tf:4.5(.177) 5.6(.220) 3.1(.122) 0.4 ( .016 ) 1.55 ( .061 ) 1.55 ( .061 ) 0.4 0.03 (.016 .001) 0.2 0.05 (.008 .002) 0.75 0.1 (.030 .004) 0.85 0.1 (.033 .004) 5.4(.213) 0.4 ( .016 ) 1.55 (.061 ) 1.55 ( .061 ) 0.4 0.03 (.016 .001) 0.2 0.05 (.008 .002) 0.75 0.1 (.030 .004) 0.85 0.1 (.033 .004) 2.9(.114) circuits dimensions mm(in.) q'ty / reel 80 100 120 2,500 2,500 1,500 f 14.2(.559) 20.2(.795) 20.2(.795) 28.4(1.118) 40.4(1.591) 40.4(1.591) 32.0(1.260) 44.0(1.732) 44.0(1.732) 33.5(1.319) 45.5(1.791) 45.5(1.791) sww1 note: 1. specifications conform to jis c0806. the tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. plug receptacle taping specifications pc board layout (viewed from component side) assembly layout jas connector note: 1. tolerances are non-cumulative: 0.05mm ( .002") for all centers. 2. the dimensions above should serve as a guideline. contact jst for details.
|
